Kidde KN-COSM-BA User Manual download pdf (Page 22)

To keep your Smoke/CO Alarm in good working order, please

follow these simple steps:

• Verify the unit's alarm and LED lights operation by pushing the

test/reset button once a week.

• Remove the unit from mounting bracket and vacuum the

alarm cover and vents with a soft brush attachment once a

month to remove dust and dirt. REINSTALL IMMEDIATELY

AFTER CLEANING AND THEN TEST USING THE TEST/RESET

BUTTON!

• Never use detergents or other solvents to clean the unit.

• Avoid spraying air fresheners, hair spray, or other aerosols near

the Smoke/CO Alarm.

Do not paint the unit. Paint will seal the vents and interfere with

the sensor’s ability to detect smoke and CO. Never attempt to

disassemble the unit or clean inside. This action will void your

warranty.

Move the Smoke/CO Alarm and place in another location prior to

performing any of the following:

• Staining or stripping wood floors or furniture

• Painting

• Wall papering

• Using adhesives

Storing the unit in a plastic bag during any of the above projects

will protect the sensors from damage. Do not place near a diaper

pail.

WARNING: Reinstall the Smoke/CO Alarm as soon as

possible to assure continuous protection.

When household cleaning supplies or similar contaminates are

used, the area must be well ventilated. The following substances

can effect the CO sensor and may cause false readings and

damage to the sensor:

Methane, propane, iso-butane, iso-propanol, ethyl acetate,

hydrogen sulfide, sulfide dioxides, alcohol based products,

paints, thinner, solvents, adhesives, hair spray, after shave,

perfume, and some cleaning agents.

General Maintenance

2553-7201-00(KN-COSM-BA)_V5.qxd:_ 2013.9.13 10:39 AM Pag

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

No comments

Kidde KN-COSM-BA User Manual Page 22