Kidde KN-COSM-IB User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 33
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
When mixing compatible models with battery backup with models
without battery backup, be advised that the models without battery
backup will not respond during an AC power failure.
This unit is only approved to interconnect with other
Kidde/Nighthawk products. It is NOT approved to interconnect
with any other brand of detection product.
This alarm is interconnect compatible with the following alarms
and accessories:
–Smoke alarms: 1235, 1275, 1276, 1285, i12020, i12020A,
i12040, i12040A, i12060, i12060A, i4618, i4618A,
KN-SMFM-I, RF-SM-ACDC, PE120, P12040, Pi2000, Pi2010,
KN-COSM-I, KN-COSM-IB,
Kidde/Firex: i4618, i4618A
– Heat alarm: HD135F
– CO alarms: KN-COB-IC, KN-COP-IC, KN-COPE-I
– Relay modules: SM120X, CO120X
– Strobe Light: SL177i, SLED177i
See User Guide for specific application information.
For more information about compatible interconnect units and
their functionality in an interconnect system, visit our web site
at www.kidde.com.
Smoke HUSH Control Feature
The HUSH feature has the capability of temporarily desensitizing
the smoke alarm circuit for approximately 9 minutes. This feature
is to be used only when a known alarm condition, such as smoke
from cooking, activates the alarm. When the unit is in alarm,You
can put your Smoke/CO Alarm in HUSH mode by pushing the
test/reset button. If the smoke is not too dense, the alarm will
silence immediately, the unit will verbally announce “HUSH
MODE ACTIVATED”, and the green LED will flash every 2
seconds for approximately 9 minutes. This indicates that the
smoke alarm is in a temporarily desensitized condition. Your
Smoke/CO Alarm will automatically reset after approximately 9
minutes. When the unit returns to normal operation after being
in HUSH mode, it will verbally announce “HUSH MODE
CANCELLED”, and sound the alarm if smoke is still present. The
HUSH feature can be used repeatedly until the air has been
cleared of the condition causing the alarm. While the unit is in
HUSH mode, pushing the test/reset button on the alarm will also
end the HUSH period.
NOTE: DENSE SMOKE WILL OVERRIDE THE HUSH CONTROL
FEATURE AND SOUND A CONTINUOUS ALARM.
15
Operating Instructions
2544-7201-00(KN-COSM-IBA)_V4a.qxd:_ 2013.7.1 2:44 PM Pag
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

Comments to this Manuals

No comments