ATTENTION! The model SLED177i strobe light is designed to notify hearing impairedindividuals of impending danger. The strobe light has no detection me
PIN” IN SECTION (5) FOR PIN REMOVAL INSTRUCTIONS.CLEANING YOUR STROBE LIGHT:To clean your Strobe light remove it from the mounting plate and disconnec
BEDROOM OR ON A DIFFERENT FLOOR, IT WILL NOT WAKE UP A SOUNDSLEEPER. THE USE OF ALCOHOL OR DRUGS MAY ALSO IMPAIR ONE’SABILITYTO RESPOND TO THE VISUAL
WHAT TO DO WHEN THE ALARM ACTIVATES• Alert small children in the home. • Leave immediately by your escape plan. Every second counts, so don’t wastetim
Smoke Detection - Are More Smoke Alarms Desirable? The required number ofsmoke alarms might not provide reliable early warning protection for those ar
TEN YEAR LIMITED WARRANTYKIDDE Safety warrants the original purchaser that the enclosed Visual signaling Devicewill be free of defects in material and
IMPORTANT! READ ALL INSTRUCTIONS BEFORE INSTALLATION AND SAVETHIS USER GUIDE FOR FUTURE REFERENCEWARNING! THIS VISUAL SIGNALING DEVICE HAS NO DETECTI
1. SPECIFICATIONSModel Number: SLED177i ( 3 WIRE INTERCONNECT UNIT ) Electrical Rating:Regulated 120VAC (96-132VAC)Maximum Operating RMS Current 630 m
The following diagram shows that the light intensity gradually decreases as theviewing angle is increased. Use this information to determine the best
5. INSTALLATION INSTRUCTIONSREAD CAREFULLY – WIRING REQUIREMENTS• This smoke alarm should be installed on a U.L. listed or recognized junctionbox. All
4. The maximum wire run distance between the first and last device in an inter-connect system is 1000 ft.5. Figure 1 illustrates interconnection wirin
MOUNTING INSTRUCTIONS:• A mounting plate is provided on the back of the strobe light. This mountingplate is installed on the electrical box between th
•Pull the AC QUICK CONNECTOR through the center hole in the mounting plate andinstall the mounting plate, making sure that the mounting screws are pos
CAUTION! Early warning fire detection and visual notification is bestachieved by the installation of fire detection and visual notification equipment
Comments to this Manuals