Kidde SIRIUS TM0109 User Manual download pdf

TM0109 Page 1 of 4 Rev 1

Sirius II

IIII

II 2, 4 & 8 ZONE FIRE ALARM PANEL

USER GUIDE

1. GENERAL

The Sirius II fire alarm panel comes in 2, 4 and 8 zone versions. The panel is mains powered and

also has two standby batteries (12 V, 7 Ah). The front panel features an LCD display, a zone window,

status windows and user controls.

2. PANEL DISPLAY

The zone windows have an alarm light (red) and a fault light (yellow) next to each zone. The panel

status windows have a single light next to each category. All lights are coloured yellow except the

POWER ON light (green) and the ALARM light (red). The lower row contains the control switches

used for programming, test and maintenance.

3. OPERATION

There are two levels of user access to the panel’s controls. Access Level 1 is the normal operating

condition, where with no zones disabled, the green POWER ON light is on and all other lights are off.

The TEST button, which is used to test all of the lights in the panel display, is operative. All other

controls are inoperative and are only available in Access Level 2. A pass code is required to enter

Access Level 2.

To enter Access Level 2, press the ACCESS button and, using the UP, DOWN and ENTER buttons,

enter the pass code 7179. The yellow PANEL ACCESS light comes on. To revert to Access Level 1,

press the ACCESS button twice.

Note: The panel can be configured for the internal buzzer to be disabled. All references to it in

this User Guide assume that it is enabled. If you are unsure about whether the internal buzzer

is enabled or not, contact your service provider.

Status Windows

Zone Windows

Control Switches

1 2 3 4

TM0109 Page 1 of 4 Rev 1 Sirius IIIIIIII 2, 4 & 8 ZONE FIRE ALARM PANEL USER GUIDE 1. GENERAL The Sirius II fire alarm panel comes in 2,

Page 2

TM0109 Page 2 of 4 Rev 1 The following features are available in Access Level 2: 3.1 The SILENCE RESOUND ALARMS button is used to silence or re-s

Page 3

TM0109 Page 3 of 4 Rev 1 4. WHEN AN ALARM CONDITION OCCURS When a fire condition is detected in a zone, the relevant red zone alarm light flashe

TM0109 Page 4 of 4 Rev 1 MAINTENANCE RECORD DATE MAINTENANCE OPERATION CARRIED OUT BY

No comments

Kidde SIRIUS TM0109 User Manual